 |
|
To facilitate the careful slicing
operation, it is most important that the progress of the blade through
the tissue be clearly observed. This observation is used to ensure
control of the speed of advance and of the oscillation of the blade.
Two elements are required for clear observation, light and
magnification. |
| Model
7550LS - Built into Integraslice  |
Model 752LS - Free standing for use with
Vibroslice
 |
Cold Light Source
Features:
- Ability to direct the light where it is needed with the two
flexible fiber optic light guides.
- Maintains temperature stability of the tissue or surrounding
a.c.s.f.
- Light intensity is adjustable by a rotary dial knob.
|
|
Observation
Accessories Specifications: |
|
752LS/7550LS Cold Light Source:
|
-
20W/12V Halogen lamp, 2000 hour life approx
-
Fan and electronic power supply
-
Adjustable with potentiometer
-
Twin 500mm fibre optic light guides
|
|
752IM/7550IM
Inspection Microscope:
|
-
Binocular, 45º inclined
-
1x to 4x zoom
-
10x to 40x magnification
-
WF10x/20mm eyepiece
-
80mm working distance
|
|
752MG/7550MG
Magnifying Glass: |
-
115mm diameter
-
305mm focal length
-
2x magnification
|
|
|
|
 |
|
For general global slices a magnifying
glass offering approximately 2x magnification is sufficient.
However, if specific loci are under study then an inspection
microscope is desirable. The binocular inspection microscope with
10x to 40x magnification, a zoom range of 1x to 4x and a working
distance of 80mm is ideal for the task. |
|
Model 752IM - free
standing for Vibroslice
Model 752MG (not shown)
|
Model 7550MG and 7550IM - built into
Integraslice |
